Resolucija 1680x1050 na HP8510p (ATI mobility 2600)

Zivjo!

Imam notebook HP 8510p in problem z nastavitvijo native resolucije za display, ki je 1680x1050.

S pomočjo Envy orodja sem si namestil ati gonilnike. Ti lepo prepoznajo kakšen monitor imam priključen,
ter katero grafično kartico imam. (ATI Control center). Prav tako mi lepo deluje strojno pospeševanje.
Lahko vklopim vse tri nivoje efektov (Appearance). Vse OK.

Edini problem je resolucija. Maksimum, ki ga dosežem je 1280x1024.

To je z nastavitvijo powerplay optimize for batery life

17315 frames in 5.0 seconds = 3462.816 FPS
17297 frames in 5.0 seconds = 3459.304 FPS
17276 frames in 5.0 seconds = 3455.096 FPS
17329 frames in 5.0 seconds = 3465.675 FPS
17331 frames in 5.0 seconds = 3466.186 FPS
17337 frames in 5.0 seconds = 3467.310 FPS

tole pa z optimizacijo za poerformance

27947 frames in 5.0 seconds = 5589.308 FPS
28100 frames in 5.0 seconds = 5619.809 FPS
28110 frames in 5.0 seconds = 5621.884 FPS
28111 frames in 5.0 seconds = 5622.093 FPS
28113 frames in 5.0 seconds = 5622.546 FPS
28114 frames in 5.0 seconds = 5622.625 FPS
28112 frames in 5.0 seconds = 5622.292 FPS
28074 frames in 5.0 seconds = 5614.601 FPS

izpis fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 2600
OpenGL version string: 2.1.7170 Release

Se moja xorg.conf datoteka

Section \"Files\"
EndSection

Section \"InputDevice\"
Identifier \"Generic Keyboard\"
Driver \"kbd\"
Option \"CoreKeyboard\"
Option \"XkbRules\" \"xorg\"
Option \"XkbModel\" \"pc105\"
Option \"XkbLayout\" \"si\"
EndSection

Section \"InputDevice\"
Identifier \"Configured Mouse\"
Driver \"mouse\"
Option \"CorePointer\"
Option \"Device\" \"/dev/input/mice\"
Option \"Protocol\" \"ImPS/2\"
Option \"ZAxisMapping\" \"4 5\"
Option \"Emulate3Buttons\" \"true\"
EndSection

Section \"InputDevice\"
Identifier \"Synaptics Touchpad\"
Driver \"synaptics\"
Option \"SendCoreEvents\" \"true\"
Option \"Device\" \"/dev/psaux\"
Option \"Protocol\" \"auto-dev\"
Option \"HorizEdgeScroll\" \"0\"
EndSection

Section \"InputDevice\"
Driver \"wacom\"
Identifier \"stylus\"
Option \"Device\" \"/dev/input/wacom\"
Option \"Type\" \"stylus\"
Option \"ForceDevice\" \"ISDV4\"# Tablet PC ONLY
EndSection

Section \"InputDevice\"
Driver \"wacom\"
Identifier \"eraser\"
Option \"Device\" \"/dev/input/wacom\"
Option \"Type\" \"eraser\"
Option \"ForceDevice\" \"ISDV4\"# Tablet PC ONLY
EndSection

Section \"InputDevice\"
Driver \"wacom\"
Identifier \"cursor\"
Option \"Device\" \"/dev/input/wacom\"
Option \"Type\" \"cursor\"
Option \"ForceDevice\" \"ISDV4\"# Tablet PC ONLY
EndSection

Section \"Device\"
Identifier \"ATI Technologies Inc ATI Default Card\"
Driver \"fglrx\"
Busid \"PCI:1:0:0\"
Option \"VideoOverlay\" \"on\"
Option \"OpenGLOverlay\" \"off\"
EndSection

Section \"Monitor\"
Identifier \"Generic Monitor\"
Option \"DPMS\"
EndSection

Section \"Screen\"
Identifier \"Default Screen\"
Device \"ATI Technologies Inc ATI Default Card\"
Monitor \"Generic Monitor\"
Defaultdepth 24
SubSection \"Display\"
Modes \"1280x1024\"
EndSubSection
EndSection

Section \"ServerLayout\"
Identifier \"Default Layout\"
screen \"Default Screen\"
Inputdevice \"Generic Keyboard\"
Inputdevice \"Configured Mouse\"

# Uncomment if you have a wacom tablet
# InputDevice \"stylus\" \"SendCoreEvents\"
# InputDevice \"cursor\" \"SendCoreEvents\"
# InputDevice \"eraser\" \"SendCoreEvents\"
Inputdevice \"Synaptics Touchpad\"
EndSection
Section \"Extensions\"
Option \"Composite\" \"Enable\"
EndSection

Ima kdo kakšno idejo?

Monitorja mi ne prepozna. Ce v Admin->Screens and Graphics nastavim display kot 1680x1050 in nato še resolucijio, je slika popolnoma spacana.

Zelo bi bil vesel rešitve.

Komentarji

Za komentiranje se prijavite ali pa se vpišite.