tty-jev ni več?

Zdravo.
Od nadgraditve na gutsyja (če se ne motim) mi ne dela več preklop ctrl-alt-F1. Vidim samo še utripajoč (sumljivo velik) podčrtaj. Ali je to feature, bug ali pa sem sam kaj narobe nastavil?

Komentarji

  • Cube Član Ubuntu.si
    uredil/-a 28. January, 2008
    ce zaces kaj pisat je sezmer pocrtaj al se ti crke izpisujejo?

    lp,cube
  • skoz podčrtaj. nič se ne izpisuje. kot da bi bile tty konzole izklopljene (morda sem kaj šaril, pa sem jih izklopil - ali me lahko kdo spomne kje se nastavlja število konzol).
    Hecno pa je to, da sem včasih med več grafičnimi logini preklapljal s ctrl-alt-f7 in ctrl-alt-f9. Sedaj to ni več mogoče (gutsy je uvedel nekakšno hitro preklapljanje ala wins s klikom na ikonco...- morda je to povezano)
  • bl4z Član Ubuntu.si
    cat /etc/inittab

    ...
    #
    # Note that on most Debian systems tty7 is used by the X Window System,
    # so if you want to add more getty's go ahead but skip tty7 if you run X.
    #
    1:2345:respawn:/sbin/getty 38400 tty1
    2:23:respawn:/sbin/getty 38400 tty2
    #3:23:respawn:/sbin/getty 38400 tty3
    #4:23:respawn:/sbin/getty 38400 tty4
    #5:23:respawn:/sbin/getty 38400 tty5
    #6:23:respawn:/sbin/getty 38400 tty6
  • hm, pri meni sploh ni /etc/inittab fajla.
  • bl4z Član Ubuntu.si
    caki .. ti ga pejstam

    cat /etc/inittab
    # /etc/inittab: init(8) configuration.
    # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $

    # The default runlevel.
    id:2:initdefault:

    # Boot-time system configuration/initialization script.
    # This is run first except when booting in emergency (-b) mode.
    si::sysinit:/etc/init.d/rcS

    # What to do in single-user mode.
    ~~:S:wait:/sbin/sulogin

    # /etc/init.d executes the S and K scripts upon change
    # of runlevel.
    #
    # Runlevel 0 is halt.
    # Runlevel 1 is single-user.
    # Runlevels 2-5 are multi-user.
    # Runlevel 6 is reboot.

    l0:0:wait:/etc/init.d/rc 0
    l1:1:wait:/etc/init.d/rc 1
    l2:2:wait:/etc/init.d/rc 2
    l3:3:wait:/etc/init.d/rc 3
    l4:4:wait:/etc/init.d/rc 4
    l5:5:wait:/etc/init.d/rc 5
    l6:6:wait:/etc/init.d/rc 6
    # Normally not reached, but fallthrough in case of emergency.
    z6:6:respawn:/sbin/sulogin

    # What to do when CTRL-ALT-DEL is pressed.
    ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now

    # Action on special keypress (ALT-UpArrow).
    #kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."

    # What to do when the power fails/returns.
    pf::powerwait:/etc/init.d/powerfail start
    pn::powerfailnow:/etc/init.d/powerfail now
    po::powerokwait:/etc/init.d/powerfail stop

    # /sbin/getty invocations for the runlevels.
    #
    # The "id" field MUST be the same as the last
    # characters of the device (after "tty").
    #
    # Format:
    # :::
    #
    # Note that on most Debian systems tty7 is used by the X Window System,
    # so if you want to add more getty's go ahead but skip tty7 if you run X.
    #
    1:2345:respawn:/sbin/getty 38400 tty1
    2:23:respawn:/sbin/getty 38400 tty2
    #3:23:respawn:/sbin/getty 38400 tty3
    #4:23:respawn:/sbin/getty 38400 tty4
    #5:23:respawn:/sbin/getty 38400 tty5
    #6:23:respawn:/sbin/getty 38400 tty6

    # Example how to put a getty on a serial line (for a terminal)
    #
    #T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
    #T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100

    # Example how to put a getty on a modem line.
    #
    #T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
  • :) ya ne.. ce gutsy ma kuj cryptan menu.lst al se men samo zdi =)
  • christooss Član Ubuntu.si
    Glede menu.lst se pa samo tebi zdi :) Men dela BP
  • No medtem sem ugotovil, v čem je problem. Rešil ga žal nisem tako kot bi rad. Gre za znan hrošč oz. feature v gutsyju:
    https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/129910.
    Problem je v tem, da sem imel v grubovem menu.lst naveden parameter vga=xxx, ki pa v gutsyju povzroča izginotje tty-jev, saj je framebuffer zaradi določenih razlogov privzeto izklopljen. Ko sem ga vklopil, sem imel težave z X-i, tako da sem raje se sprijaznil z nagravžno velikimi črkami v konzoli in izklopil parameter vga.
Za komentiranje se prijavite ali pa se vpišite.